BIRSCH INDUSTRIES INC -- 112725, DESCALER -- 6850-00N032795
===================== Product Identification =====================
Product ID:112725, DESCALER
MSDS Date:07/26/1990
FSC:6850
NIIN:00N032795
=== Responsible Party ===
Company Name:BIRSCH INDUSTRIES INC
Address:3412 STRATHMORE AVE
City:NORFOLK
State:VA
ZIP:23504
Country:US
Info Phone Num:804-622-0355
Emergency Phone Num:800-255-3924
Preparer's Name:JOHN M. BIRSCH, SR.
CAGE:61781
=== Contractor Identification ===
Company Name:BIRSCH INDUSTRIES INC
Address:3412 STRATHMORE AVE
Box:City:NORFOLK
State:VA
ZIP:23504
Country:US
Phone:757-622-0355
CAGE:61781
============= Composition/Information on Ingredients =============
Ingred Name:PHOSPHORIC ACID (SARA III)
CAS:7664-38-2
RTECS #:TB6300000
Fraction by Wt: <15%
OSHA PEL:1 MG/M3;3 STEL
ACGIH TLV:1 MG/M3;3 STEL
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS
Ingred Name:HYDROGEN CHLORIDE; (HYDROCHLORIC ACID), (MURIATIC ACID)
(SARA III)
CAS:7647-01-0
RTECS #:MW4025000
Fraction by Wt: <6%
OSHA PEL:5 PPM, C
ACGIH TLV:5 PPM, C
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS
Ingred Name:WATER
CAS:7732-18-5
RTECS #:ZC0110000
Fraction by Wt: <100%
===================== Hazards Identification =====================
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN:TISSUE DAMAGE ON CONTACT.
EYES:EYE BURNS ON CONTACT. INHAL:RESPIRATORY IRRITATION FROM
EXCESSIVE BREATHING OF MIST &/OR VAPORS. INGEST:DO NOT TAKE
INTERNALLY.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
======================= First Aid Measures =======================
First Aid:SKIN:WASH EXPOSED AREA W/SOAP & H2O FOR @ LST 15 MINS, WHILE
REMOVING CLTHG. CALL MD. WASH CLOTHES BEFORE REUSE. EYES:FLUSH
THORO W/H2O FOR @ LST 15 MINS. GET MD. IF MD IS NOT AVAIL, FLUSH
ADDNL 15 MI NS. INHAL:REMOVE FROM FURTHER EXPOS. IFUNCON OCCURS,
SEEK IMMED MED AID. BRTHG STOPS - USE MOUTH-TO-MOUTH RESUSCITATION.
INGEST:DO NOT INDUCE VOMIT. IF CONSCIOUS, GIVE LG QTYS OF
MILK/H2O.(SUPDAT)
===================== Fire Fighting Measures =====================
Extinguishing Media:MEDIA SUITABLE FOR SURROUNDING FIRE .
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:REACTS W/METALS TO RELEASE HYDROGEN.
================== Accidental Release Measures ==================
Spill Release Procedures:WEAR PROTECTIVE CLOTHING. SPRINKLE HYDRATED
LIME OR SODA ASH. SCRAPE UP & REMOVE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
====================== Handling and Storage ======================
Handling and Storage Precautions:DO NOT STACK CASES OR PAILS OVER THREE
HIGH. AVOID INHALATION OF VAPORS OR MISTS. AVOID ALL PERSONAL
CONTACT.
Other Precautions:PLEASE READ & FOLLOW DIRECTIONS ON PRODUCT LABEL.
THEY ARE YOUR BEST GUIDE FOR PRODUCT IN MOST EFFECTIVE WAY, & THEY
ALSO GIVE THE NECESSARY SAFETY PRECAUTIONS TO PROTECT YOUR HEALTH.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR, IF VAPORS OR
MISTS EXCEED APPLICABLE STANDARDS.
Ventilation:NO SPECIAL REQUIREMENTS UNDER ORDINARY CONDITIONS.
Protective Gloves:RUBBER GLOVES.
Eye Protection:CHEM WORK GOGG/FULL LENGTH FCSHLD.
Other Protective Equipment:RUBBER APRON & RUBBER BOOTS.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
FIRST AID PROC:GET MD IMMEDIATELY.
================== Physical/Chemical Properties ==================
HCC:C1
Boiling Pt:B.P. Text:>212F,>100C
Vapor Pres:20 @ 68F
Vapor Density:>1
Spec Gravity:1.07
pH:1
Evaporation Rate & Reference:<1 (WATER=1)
Solubility in Water:COMPLETE
Appearance and Odor:RED WATERY THIN LIQUID W/ACID ODOR.
Percent Volatiles by Volume:80
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
AVOID METALS & OTHER CHEMICALS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:DO NOT USE ON ALUMINUM OR SOFT METALS.
==================== Disposal Considerations ====================
Waste Disposal Methods:DISPOSE AT APPROPRIATE FACILITY I/A/W APPLICABLE
FEDERAL, STATE & LOCAL LAWS & REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.