RADIATOR SPECIALTY COMPANY -- L1-12, SOLDER SEAL LIQUID WRENCH NO. 1  -- 9150-00-529-7518
<pre>=====================  Product Identification  =====================

Product ID:L1-12, SOLDER SEAL LIQUID WRENCH NO. 1
MSDS Date:04/01/1987
FSC:9150
NIIN:00-529-7518
=== Responsible Party ===
Company Name:RADIATOR SPECIALTY COMPANY
Address:1400 WEST INDEPENDENCE BOULEVARD
City:CHARLOTTE
State:NC
ZIP:28208
Country:US
Emergency Phone Num:(704) 377-6555
CAGE:77628
=== Contractor Identification ===
Company Name:RADIATOR SPECIALTY COMPANY
Address:1900 WILKINSON BLVD.
Box:34689
City:CHARLOTTE
State:NC
ZIP:28208
Country:US
Phone:704-377-6555/303-623-5716
CAGE:77628

=============  Composition/Information on Ingredients  =============

Ingred Name:PETROLEUM DISTILLATES (NAPHTHA OR RUBBER SOLVENT)
CAS:8002-05-9
RTECS #:SE7449000
Fraction by Wt: <90.0%
OSHA PEL:400 PPM
ACGIH TLV:400 PPM; 8990

Ingred Name:PETROLEUM MINERAL OIL; WT % RANGE:	8-9% (EXTRACT, MIDDLE
    DISTILLATE SOLVENT)
CAS:64742-06-9
Fraction by Wt: <09.0%
OSHA PEL:5 MG/CUM (OIL MIST)
ACGIH TLV:5 MG/CUM (OIL MIST)

Ingred Name:CARBON DIOXIDE
CAS:124-38-9
RTECS #:FF6400000
Fraction by Wt: <03.0%
OSHA PEL:5000 PPM
ACGIH TLV:5000PPM/30000STEL;93

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Explanation of Carcinogenicity:MANUFACTURER SPECIFIED THAT PETROLEUM
    MINERAL OIL AND DISTILLATE ARE CARCINOGEN SUSPECTED BY NTP.

=======================  First Aid Measures  =======================

First Aid:INHALE:REMOVE TO FRESH AIR, GIVE CPR/O*2 IF
    NEED;EYES/SKIN:FLUSH W LG AMTS H*2O FOR 15 MIN;INGEST:RINSE MOUTH;
    GET MEDICAL ATTENTION FOR EYES, BREATHING DIFFICULTY, OR OTHER
    SYMPTOMS OF OVEREXPOSURE.

=====================  Fire Fighting Measures  =====================

Flash Point:N/R(AEROSOLS)
Extinguishing Media:CO*2, FOAM, DRY CHEM.
Fire Fighting Procedures:WEAR SELF-CNTD BRTHG,APP H*20 SPRAY TO COOL
    CONTR.
Unusual Fire/Explosion Hazard:CONTAINERS MAY EXPLODE IF HEATED OVER
    130F

==================  Accidental Release Measures  ==================

Spill Release Procedures:REMOVE IGNITION SOURCES,VENTILATE AREA
    WELL.ABSORB WITH VERMICULITE OR OTHER MATERIALS, SUCH AS
    SAWDUST,RAGS,PAPER & PLACE IN CLOSED CONTAINER. USE NON SPARKING
    TOOLS. WEAR PROPER PROTECTIVE EQUIPMENT  DURING CLEAN UP.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE IN COOL,DRY,WELL VENTILATED
    AREA. PROTECT FROM PHYSICAL DAMAGE.AVOID ANY PHYSICAL CONTACT. KEEP
    CONTAINERS TIGHTLY CLOSED
Other Precautions:KEEP AWAY FROM HEAT & FIR; MFR SUGGESTS.USE EYE
    PROTECTION EQUIP WHEN APPLICATION INVOLVES LARGE QUANTITIES.DO NOT
    STORE NEAR FIRE OR FLAMES OR ABOVE 120F.DO NOT PUNCTURE CONTAINERS.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NONE SHOULD BE NEEDED
Ventilation:MECH(GEN)OR LOCAL EXHAUST THAT PROVIDES ADEQUATE
    VENTILATION
Protective Gloves:IMPERVIOUS
Eye Protection:CHEM SPLASH GOGGLES
Other Protective Equipment:NORMAL WORK CLOTHING COVERING ARMS & LEGS.
Supplemental Safety and Health

==================  Physical/Chemical Properties  ==================

HCC:V2
Boiling Pt:<-6.7C, 20.F
B.P. Text:<20F(LIQ)
Vapor Pres:<99
Spec Gravity:0.84
Solubility in Water:NEGLIGIBLE
Appearance and Odor:DARK LIQUID WITH CHARACTERISTIC ODOR.
Percent Volatiles by Volume:99%

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:HEAT, IGNITION SOURCES
Hazardous Decomposition Products:INCOMPLETELY BURNED CARBON PRODUCTS,
    CO*2, CO.

====================  Disposal Considerations  ====================

Waste Disposal Methods:KEEP IN COVERED DRUMS,PENDING DISPOSAL. HANDLE &
    DISPOSE IN FULL COMPLIANCE WITH ALL APPLICABLE
    INTERNATIONAL,FEDERAL,STATE, & LOCAL REGULATIONS. DO NOT INCINERATE
    FULL OR EMPTY CANS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.