ANSUL FIRE PROTECTION, WORMALD U.S.INC. -- 25521,PURPLE-K;DRY CHEMICAL EXTINGUISHING AGENT  -- 4210-00-035-9490
<pre>=====================  Product Identification  =====================

Product ID:25521,PURPLE-K;DRY CHEMICAL EXTINGUISHING AGENT
MSDS Date:03/30/1994
FSC:4210
NIIN:00-035-9490
=== Responsible Party ===
Company Name:ANSUL FIRE PROTECTION, WORMALD U.S.INC.
Address:ONE STANTON STREET
City:MARINETTE
State:WI
ZIP:54143-2542
Country:US
Info Phone Num:715-735-7411
Emergency Phone Num:715-735-7411/800-424-9300(CHEMTREC)
CAGE:03670
=== Contractor Identification ===
Company Name:ANSUL INC
Address:ONE STANTON STREET
Box:City:MARINETTE
State:WI
ZIP:54143-2542
Country:US
Phone:715-735-7411
CAGE:03670

=============  Composition/Information on Ingredients  =============

Ingred Name:MICA - SILICATES (< 1% CRYSTALLINE SILICA)
CAS:12001-26-2
RTECS #:VV8760000
Fraction by Wt: <5%
Other REC Limits:NONE SPECIFIED BY M.
OSHA PEL:20 MPPCF
ACGIH TLV:3 MG/M3 RDUST; 9293

Ingred Name:MAGNESIUM ALUMINUM SILICATE
CAS:8031-18-3
Fraction by Wt: <5%
Other REC Limits:1O MG/M3
ACGIH TLV:10 MG/M3

Ingred Name:POTASSIUM BICARBONATE
CAS:298-14-6
Fraction by Wt: 90-93%
Other REC Limits:NONE SPECIFIED BY M.

Ingred Name:METHYL HYDROGEN POLYSILOXANE
CAS:63148-57-2
Fraction by Wt: <1%
Other REC Limits:NONE SPECIFIED BY M.

Ingred Name:PIGMENT PURPLE
Fraction by Wt: <0.005%

Ingred Name:CARBON DIOXIDE, STORED PRESSURE IS MINI 150 LBS.
CAS:124-38-9
RTECS #:FF6400000
OSHA PEL:5000 PPM
ACGIH TLV:5000PPM/30000STEL;93

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE:IRRITATION OF EYES, SKIN AND
    RESPIRATORY TRACT, COUGH, SHORTNESS OF BREATH. CHRONIC:FIBROSIS OF
    THE LUNGS.
Explanation of Carcinogenicity:DATA PER MSDS
Effects of Overexposure:IRRITATION, COUGH, SHORTNESS OF BREATH.
Medical Cond Aggravated by Exposure:REACTIVE AIRWAY

=======================  First Aid Measures  =======================

First Aid:EYES AND SKIN:FLUSH WITH PLENTY OF WATER FOR ABOUT 15-20
    MINUTES, SEEK MEDICAL ATTENTION. INHALATION:REMOVE TO FRESH AIR, IF
    NOT BREATHING, PROVIDE ARTIFICIAL RESPIRATION AND/OR OXYGEN.

=====================  Fire Fighting Measures  =====================

Flash Point:NONE
Fire Fighting Procedures:NONE;THIS IS FIRE EXTINGUISHING AGENT
Unusual Fire/Explosion Hazard:NONE EXPECTED

==================  Accidental Release Measures  ==================

Spill Release Procedures:EVACUATE ALL PERSONNEL FROM RELEASE AREA.
    SWEEP UP THE MATERIAL FROM THE FLOOR FOR PROPER DISPOSAL.
Neutralizing Agent:NOT APPLICABLE.

======================	Handling and Storage  ======================

Handling and Storage Precautions:SHOULD BE STORE IN ORIGINAL CONTAINER.
Other Precautions:DO NOT MIX AGENTS.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NORMALLY NOT REQUIRED. USE NIOSH/MSHA APPROVED
    RESPIRATOR FORDUST/MIST. IN CONFINED AREAS USE SELF-CONTAINED
    BREATHING APPARATUS.
Ventilation:NORMAL ROOM VENTILATION
Protective Gloves:WORK GLOVES FOR HANDLING.
Eye Protection:APPROVED SAFETY GLASSES OR FACE SHIELD.
Other Protective Equipment:PROTECTIVE CLOTHING, EYE-WASH FACILITIES.
Work Hygienic Practices:OBSERVE GOOD PERSONAL HYGIENE PRACTICES AND
    RECOMMENDED PROCEDURES. USE PROPER CARE WHEN HANDLING AND STORING.
Supplemental Safety and Health
AVOID CONTACT WITH EYES AND SKIN. WASH THOROUGHLY AFTER HANDLING.

==================  Physical/Chemical Properties  ==================

HCC:G3
Vapor Pres:150 LBS
Solubility in Water:SLIGHT
Appearance and Odor:VIOLET COLORED POWDER,NO CHARACTERISTIC ODOR,
    STORED PRESSURE 150 LBS MINIMUM.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS,SODIUM,POTASSIUM ALLOY AND NH4H2PO4
Hazardous Decomposition Products:CARBON DIOXIDE

====================  Disposal Considerations  ====================

Waste Disposal Methods:RETURN EMPTIES TO MANUFACTURER.	DISPOSAL SHOULD
    BE MADE IN ACCORDANCE WITH ALL APPLICABLE FEDERAL, STATE AND LOCAL
    LAWS AND REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.